Cam screw with knife edge washer mild steel black grey RAL 7021 04434-10-12
Unitatea de vânzare
€39.23
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Șurub excentric de fixare
Varianta 1
cu discuri cu gheare
Varianta 2
cu pârghie de strângere reglabilă
Materialul
corpului de bază
oțel de călire
Culoarea
corpului de bază
negru-gri RAL 7021
Materialul
componentei
Oțel călit și optimizat
Componenta
suprafeței
brunată
A1= lungimea mânerului
110,3
A= lungimea mânerului
96,8
H3=înălțimea mânerului
72,3
L=lungimea filetului
25
X=fiecare
M12
B
14,1
Cuplu de
strângere
max. Nm
15
D1
25,4
Dimensiune
4
Forța de strângere
kN
1,7
H
53
H2
37,6
H4
78
H5
9,5
H6
20
S
12,7
S1
(Cursa de prindere)
2,03
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 1 cancer & reproductive toxicity
lead and lead compounds
~ CP65 substance 2 cancer
carbon-black extracts
~ PFAS free?
yes
~ REACH SVHC-free?
no
~ REACh SVHC 1 name > threshold
lead
~ RoHS conformity
yes, with exemption
~ RoHS exemption/s
III/6a-I
~ TSCA 6(H) conformity
yes
Descriere
Material
Cam screw QT steel.
Knife edge washer case-hardening steel.
Clamping lever high-performance thermoplastic, fibreglass reinforced.
Knife edge washer case-hardening steel.
Clamping lever high-performance thermoplastic, fibreglass reinforced.
Version
Cam screw black oxidised.
Knife edge washer hardened and anodised.
Clamping lever black grey RAL 7021.
Knife edge washer hardened and anodised.
Clamping lever black grey RAL 7021.
Note
Cam screws with clamping levers can be used in a variety of ways for tool-free clamping. The the integrated clamping lever enables many elements to be rapidly clamped. The hardened knife edge washer is suitable for clamping rough pieces (saw cut stock, castings, forgings etc).
Not designed for clamping hardened materials with the torque specified. Even entire subplates can be equipped by using several cam screws with clamping lever.
Clockwise rotation is recommended for clamping. The marking on the cam screw should be on the right after clamping. (Screw in the cam screw as far as it will go, then turn it back one turn).
”S” = Distance from the workpiece to the screw centre (clamping screw).
Not designed for clamping hardened materials with the torque specified. Even entire subplates can be equipped by using several cam screws with clamping lever.
Clockwise rotation is recommended for clamping. The marking on the cam screw should be on the right after clamping. (Screw in the cam screw as far as it will go, then turn it back one turn).
”S” = Distance from the workpiece to the screw centre (clamping screw).
Assembly
Clamping process:
1. Screw in the cam screw as far as it will go.
2. Screw the cam screw back one turn.
3. Position the workpiece.
4. Turn the cam screw clockwise to clamp the workpiece. (The marking on the cam screw should be on the right after clamping).
1. Screw in the cam screw as far as it will go.
2. Screw the cam screw back one turn.
3. Position the workpiece.
4. Turn the cam screw clockwise to clamp the workpiece. (The marking on the cam screw should be on the right after clamping).
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.
Descoperiți gama de produse norelem
