Wedge clamp serrated QT steel black hardened 04524-2208
- Suitable for series clamping
- For high clamping forces
- Can be used both in a tapped hole and in a T-slot
- Tolerance compensation possible with elongated hole
Unitatea de vânzare
€145.43
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Dispozitiv de fixare cu pană
Varianta 1
canelat
Varianta 2
bilateral
Materialul
corpului de bază
Oțel ameliorabil
Suprafața
corpului de bază
întărit
Culoarea
corpului de bază
negru
B=lățime
30
D=filet
M8X25
A
max.
33,5
A
min.
30,5
C
15
Cuplu de
strângere
max. Nm
25
E
2
Forța de strângere
max. kN
15
Tip montaj
Filet
Utilizarea
Piese brute
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descriere
Material
Wedge and jaw segments carbon steel.
Version
Wedge and jaw segments hardened, black.
Note
The functioning principle make the wedge clamps ideal for series clamping. The wedge form can exert high clamping forces.
These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops.
The wedge has a slightly elongated hole allowing for movement to compensate for tolerances.
Spread width:
M8 = ±0.5 mm
M10 = ±1.0 mm
M12 = ±1.0 mm
M16 = ±1.5 mm
These wedge clamps can be mounted in grid holes or T-slots. Tightening the socket screw moves the wedge down and the jaws out pressing the workpieces against the fixtures fixed stops.
The wedge has a slightly elongated hole allowing for movement to compensate for tolerances.
Spread width:
M8 = ±0.5 mm
M10 = ±1.0 mm
M12 = ±1.0 mm
M16 = ±1.5 mm
Drawing reference
D) DIN 6912 cap screw
1) Jaw face smooth
2) Jaw face serrated
3) Wedge clamps
4) Workpiece
5) Fixed stop
1) Jaw face smooth
2) Jaw face serrated
3) Wedge clamps
4) Workpiece
5) Fixed stop
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.
Other customers also bought
