Linear axis with toothed belt drive aluminium 20300-1060X0500
- Absorption of very high forces from all directions
- Optimum cycle for the movement of large masses
- Toothed belts enable high power transmission with alternating loads
- Good positioning accuracy
- Hollow shafts enable variable motor arrangements
Unitatea de vânzare
€1,335.84
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Axă liniară
Varianta 1
cu transmisie cu curea dințată
Materialul
corpului de bază
aluminiu
L=lungime
850
A
60
B
25
Comutator
de proximitate potrivit
20905-015
Constanta vitezei de avans
mm/U
101
Cuplu
la ralanti
Nm
0,3
Cureaua de distribuție
tip
32AT5
Cursă
S
500
D
17
D1
52
D4
M4
D5
7
D6
M6
D7
10
Dimensiune
60
E1
6,2
E2
16,3
E3
3
E4
9,75
Fx
N
844
Fy
dinamic
N
1384
Fz
dinamic
N
1384
Greutate
cursă 0
kg
2,34
Greutate per
1000 mm cursă
kg
4,82
Greutatea
căruciorului
kg
0,30
L1
180
L2
45
L3
30
L4
29
Lățimea canelurii
6
Mx
dinamic
Nm
8
My
dinamic
Nm
42
Mz
dinamic
Nm
42
Repe-
tabilitate
±0,05
Sarcină
utilă tipică
kg
15
accelerație max.
m/s²
80
cuplu max. de acționare
M
Nm
14
viteza
max.
m/s
3
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 1 cancer & reproductive toxicity
lead and lead compounds
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ REACh SVHC 2 name > threshold
previous lead possible
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descriere
Material
Body, extruded aluminium section.
Bearing housing and slide, aluminium.
Profile guide rail and guide carriage, steel.
Toothed belt, polyurethane with steel cord reinforcement.
Bearing housing and slide, aluminium.
Profile guide rail and guide carriage, steel.
Toothed belt, polyurethane with steel cord reinforcement.
Version
Body natural colour anodised
Bearing housing and slide, black anodised.
Tracks of the profile guide rail, inductively hardened and ground.
Bearing housing and slide, black anodised.
Tracks of the profile guide rail, inductively hardened and ground.
Note
Compact and flexible linear actuators with toothed belt drive. The body consists of a self-supporting aluminium extruded section with integrated profile guide rail. This rail system is able to absorb highest forces from all directions, is low-wear, and is optimised for moving large masses.
Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper T-slot. The aluminium profile is fully compatible with our standard I series profiles.
The steel cord reinforced toothed belt enables high power transmission with alternating loads, and simultaneously ensures excellent positioning accuracy with low wear and very little noise generation. The toothed belt runs on the upper side of the aluminium profile in guide slots, thus protecting all parts housed within the profile from dirt.
With its symmetrical design, the linear actuator enables motors and transmissions to be attached to all four sides of the bearing housing. The open ends of the unused hollow shafts on the bearing housing can be sealed using the optional protective caps 20300.
An additional centring hole is located on each tapped hole on the upper side of the slide. Other connecting elements can be precisely mounted on the slide in combination with the centring rings 20240.
Load specifications apply for dynamic loading.
Slots are located on the outer sides of the aluminium profile, ensuring easy, reliable assembly and enabling accessories mounted. Proximity switches can be positioned and fastened in the upper T-slot. The aluminium profile is fully compatible with our standard I series profiles.
The steel cord reinforced toothed belt enables high power transmission with alternating loads, and simultaneously ensures excellent positioning accuracy with low wear and very little noise generation. The toothed belt runs on the upper side of the aluminium profile in guide slots, thus protecting all parts housed within the profile from dirt.
With its symmetrical design, the linear actuator enables motors and transmissions to be attached to all four sides of the bearing housing. The open ends of the unused hollow shafts on the bearing housing can be sealed using the optional protective caps 20300.
An additional centring hole is located on each tapped hole on the upper side of the slide. Other connecting elements can be precisely mounted on the slide in combination with the centring rings 20240.
Load specifications apply for dynamic loading.
Technical Data
Safety rating IP50.
Temperature range
-20 °C - +70 °C.
On request
Other lengths (travel S max. 4000 mm).
Accessory
Protective caps. Slot table, motor adapter kit, synchronisation set and proximity switch, see table.
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.
Other customers also bought
