Precision slide mounted on roller bearings grey cast iron 21064-075105
- Slide bearings in hardened and ground prism guides
- Dimensioned for dynamic and static loads of up to 1730 N
- Service life of over 1 million lifting operations
- Different sizes with strokes from 10 to 105 mm
- Centring holes
Unitatea de vânzare
€545.18
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Cu ghidaj de alunecare, de precizie
Varianta 1
roți cu rulment
Materialul
corpului de bază
Fontă cenușie
B=lățime
75
L=lungimea panoului
105
A
32
A1
20
A2
23
B1
74,5
C
20
D1
10
D2
M5
D3
5,3
D4
10
E
62
E1
62
E2
25
E3
50
F
N
720
L2
60
L3
6
M
M5
M1
M4
M2
M5
Mx
Nm
18
My
Nm
26
Mz
Nm
27
P
2,1
P1
4,1
T1
0,02
T2
0,02
TA
E/E1
4
TA
E2
6
TI
E/E1
4
TI
E2
6
UNSPSC Code
31171508
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
carbon-black extracts
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descriere
Material
EN-GJL-250
Version
Bright, ground.
Note
These precision slideways with roller bearings are used in machine and fixture construction, metrology, optical instruments and precision engineering.
The stated permissible load values (F) are designed for a service life of 1 million travel cycles.
The torque values apply only to centred slides.
Cross slides are also available on request.
An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240.
F = permissible loading for dynamic and static loads.
TI E/E1 = number of fastening holes E/E1/M inside.
TA E/E1 = number of fastening holes E/E1/M outside.
TI E2 = number of fastening holes E2/D1 inside.
TA E2 = number of fastening holes E2/D1 outside.
The stated permissible load values (F) are designed for a service life of 1 million travel cycles.
The torque values apply only to centred slides.
Cross slides are also available on request.
An additional centring hole is located at holes D2 and D3 on the top of the slide. Other connecting elements can be precisely mounted on the slide in combination with our centring rings 20240.
F = permissible loading for dynamic and static loads.
TI E/E1 = number of fastening holes E/E1/M inside.
TA E/E1 = number of fastening holes E/E1/M outside.
TI E2 = number of fastening holes E2/D1 inside.
TA E2 = number of fastening holes E2/D1 outside.
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.
Other customers also bought
