Șină telescopică Extras parțial oțel zincat 21334-20-0406
- Suitable for flat mounting
- Smooth running
- High lateral stability with exact guidance
Unitatea de vânzare
€59.03 / Bucată
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Șină telescopică
Varianta 1
Extras parțial
Tip de produs
Standard
Materialul
corpului de bază
oțel
Suprafața
corpului de bază
zincat
B=lățime
9,5
H=înălțime
35,3
L=lungime
406
A
15,9
A2
250,8
A3
361,9
A4
374,6
A6
254
A7
355,6
Capacitate de încărcare
per pereche
kg
45
Cursă
S
302
Montaj
Montaj lateral
Număr articol producător
DZ0201-0016
Tip ambalaj
1 bucată = 1 pereche
UNSPSC Code
31171514
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
yes
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descriere
Material
Slides steel.
Ball cages steel.
Balls, steel.
Ball cages steel.
Balls, steel.
Version
Slides galvanised.
Ball cages steel.
Balls hardened.
Ball cages steel.
Balls hardened.
Note for ordering
Sold in pairs.
Note
On telescopic slides with partial extension, the travel is less than the installed length.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used.
The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 10,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
The dynamic load capacity of the telescopic slides indicates the maximum load rating of a vertically mounted slide pair when the entire extension length is used.
The load capacity specified is calculated with a slide spacing of 450 mm and is based on the maximum value with 10,000 cycles.
The load capacity is ca. 75% lower by horizontal mounting.
The head height of the fastening screws should not exceed 2.5 mm otherwise there is a risk of collision with other parts of the slide.
Temperature range
-20°C to +110°C.
Advantages
Suitable for flat mounting
Light running
Precise guidance for high lateral stability
Light running
Precise guidance for high lateral stability
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.