text.skipToContent text.skipToNavigation
RO
Choose your Language
  1. Pagina de start
  2. Sisteme și componente pentru construcția de mașini și instalații
  3. 22000
  4. Lanțuri, pinioane
  5. Element de tensionare de lanț TS, din oțel inoxidabil cu profil arcuit
    6. 22281-53-1062
Denumire
Întinzătoare de lanț
Formă
A
Tipul de formă
Profil arcuit
Materialul corpului de bază
oțel inoxidabil
Materialul componentei
Polietilenă
A
7,5
B
20
Colțar de fixare adecvat
22281-90-29900
Cursa de prindere L2
40
Dimensiune
TS
Divizia vamală
3/8X7/32
Forță de strângere ambele arcuri eliberate (N)
190-96
Forță de strângere arc dreapta eliberat (N)
132-60
Forță de strângere arc stânga eliberat (N)
58-32
Nr. ISO
06 B-2
~ CONFLICT MINERALS 3TG status
not yet identified
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
not yet identified
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
not yet identified

Descriere

Material
Housing stainless steel.
Chain tensioner, ultra-high molecular polyethylene PE-UHMW.
Version
Housing bright.
Note
Ready-to-install chain tensioner for low-noise, low-wear running of ISO 606 roller chains. The TS chain tensioner is used when there is insufficient space for a conventional tensioning system. Required space under the chain is only 40 mm.

The stainless steel TS chain tensioner is available with an arched bow profile.

The TS chain tensioner has two pre-tensioned springs. They can be loosened individually and enable three different tension settings. The arrangement of the holes and slots on the housing generally facilitates installation and offers additional adjustment options for re-tensioning.
Temperature range
-20 °C to +60 °C (briefly up to +80 °C).
Assembly
The ideal mounting location is directly behind the drive sprocket, so that the length of the slack side being tensioned is kept as short as possible. Several chain links should be in contact to minimise wear.
The TS chain tensioner is supplied in a locked position. Only after installation are one or both springs released, depending on the tension required. The locking screw is released by rotating it approximately four turns.
Only the left spring released: light tension.
Only the right spring released: medium tension.
Both springs released: high tension
Accessory
Angle brackets 22281-90.
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.

Descoperiți gama de produse norelem