Metal bellows coupling with radial clamping hub stainless steel 23003-06-0200380608
- Play-free mini metal bellows couplings with clamping hubs
- Made entirely of stainless steel
- For shaft diameters from 3 to 25 mm
- Torque range: 0.5 - 10 Nm
- Lowest moment of inertia
Unitatea de vânzare
€141.37
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Cuplaj cu burduf metalic
Varianta 1
cu butuc de prindere radial
Materialul
corpului de bază
oțel inoxidabil
Materialul
componentei
oțel inoxidabil
L=lungime
38
A
9
C
(ISO 4029)
M3
Cuplu nominal
Nm
2
Cuplul
de strângere al
șuruburilor Nm
2
D1
(H7)
6
D1/D2
max.
la canelură
14
D1/D2
max.
14
D1/D2
min.
3
D2
(H7)
8
D4
25
Dimensiune
20
L2
3,5
L3
11
Momentul de inerție
(gcm²)
60
R
27
Rigiditate arc
axial
(N/mm)
11
Rigiditate arc
radial
(N/mm)
21
Rigiditate la torsiune
Nm/rad
1300
decalaj axial
max. arbore
(mm)
0,4
decalaj max. arbore
radial
(mm)
0,2
decalaj unghiular
max.
(°)
1,5
viteză
max.
1/min
15000
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descriere
Material
Hub stainless steel.
Bellows stainless steel.
Bellows stainless steel.
Version
Bright.
Note
Play-free mini metal bellows coupling with high torsional stiffness. The metal bellows compensates for axial, radial and angular shaft misalignment with low restoring forces. With clamping hubs for fastening to shafts.
They are primarily used when precise position and motion transmission is required, e.g. highly dynamic positioning and servo systems, rotary encoders, tachometers, potentiometers.
They are primarily used when precise position and motion transmission is required, e.g. highly dynamic positioning and servo systems, rotary encoders, tachometers, potentiometers.
Temperature range
-30 °C to +120 °C.
Assembly
The metal bellows coupling hubs have an H7 tolerance. The recommended clearance tolerance is 0.02 - 0.05 mm. This tolerance and lubricating the shaft journals aid assembly and removal.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
On request
Desired hub holes D1 and D2 separately with tolerance class or tolerance zone.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.
Other customers also bought
