Cuplaj cu burduf metalic cu butuci de prindere detașabili aluminiu 23001-05-1500952828
- Play-free metal bellows coupling with removeable clamping hubs
- For shaft diameters from 10 to 70 mm
- Torque range: 18 - 500 Nm
- Lowest moment of inertia
- Ideal for servo motors and machine tools
Unitatea de vânzare
€266.40
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Cuplaj cu burduf metalic
Varianta 1
cu butuci de prindere detașabili
Materialul
corpului de bază
aluminiu
Materialul
componentei
oțel inoxidabil
L=lungime
95
A
28
C
(ISO 4029)
M10
Cuplu nominal
Nm
150
Cuplul
de strângere al
șuruburilor Nm
84
D1
(H7)
28
D1/D2
max.
la canelură
44
D1/D2
max.
44
D1/D2
min.
14
D2
(H7)
28
D4
82
Dimensiune
150
L1
48
L2
11
L3
36
Moment de inerție
(gm²)
0,82
R
82,9
Rigiditate
la torsiune (10³ Nm/rad)
155
Rigiditate arc
axial
(N/mm)
280
Rigiditate arc
radial
(N/mm)
2020
UNSPSC Code
23153402
decalaj axial
max. arbore
(mm)
0,5
decalaj max. arbore
radial
(mm)
0,2
decalaj unghiular
max.
(°)
1,5
viteză
max.
1/min
6900
~ CONFLICT MINERALS 3TG status
no intentional 3TG
~ CP65 substance 2 cancer
nickel (metallic)
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descriere
Material
Hub aluminium.
Bellows stainless steel.
Bellows stainless steel.
Version
Bright.
Note
Metal bellows coupling with high torsional rigidity. The metal bellows compensates for axial, radial and angular shaft misalignment with low restoring forces. With clamping hubs for fastening to shafts.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
They are primarily used when precise position and motion transmission is required, e.g. servo motors in machine tools, packaging machines, woodworking machines and in automation technology.
Temperature range
-30 °C to +120 °C.
Assembly
The metal bellows coupling hubs have an H7 tolerance. The recommended clearance tolerance is 0.02 - 0.05 mm. This tolerance and lubricating the shaft journals aid assembly and removal.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
The metal bellows may be deformed max. 3 times over the permissible deflection values specified in the catalogue during assembly and removal. Avoid any use of force.
On request
Desired hub holes D1 and D2 separately with tolerance class or tolerance zone.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Keyway acc. to DIN 6885. Please observe largest possible bore by keyway.
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.
Other customers also bought
