Rulment cu role cilindrice Oțel pentru rulmenți 23820-002004714
- Absorbția de sarcini radiale mari
- Potrivit pentru turații mari
- Disponibil cu rulment flotant sau rulment de susținere
Unitatea de vânzare
45,01 €
plus TVA.
Adăugat la coșul de cumpărături
Denumire
Rulment cu role cilindrice
Varianta 2
cu colivie
Formă
NU
Tipul de formă
Lagăr mobil
Tip de produs
FAG
Materialul
corpului de bază
Oțel pentru rulmenți
Materialul
componentei
poliamidă
B=lățime
14
D1=Diametrul exterior
47
D=diametru interior
20
KZZ. = abreviere
NU-204-E-TVP2
R min.
1
R1 min.
0,6
S
0,8
UNSPSC Code
31171508
Valori nominale ale
sarcinii dinamice
N
32500
Valori nominale ale
sarcinii statice
N
24700
Viteză limită
1/min.
16000
~ CONFLICT MINERALS 3TG status
not yet identified
~ CONFLICT MINERALS procurement
DRC conflict-free
~ CP65 substance 2 cancer
soots, tars, and mineral oils
~ PFAS free?
not yet identified
~ REACH SVHC-free?
yes
~ RoHS conformity
yes, without exemption
~ TSCA 6(H) conformity
yes
Descriere
Material
Inel interior, inel exterior și element rulant din oțel pentru rulmenți.
Colivie din poliamidă ranforsată cu fibre de sticlă.
Colivie din poliamidă ranforsată cu fibre de sticlă.
Version
Lagăr liber NU.
Lagăr axial NJ.
Lagăr axial NJ.
Note
Cylinder roller bearings accept high radial loads. The bearings are separable. The bearing parts can be fitted independently of each other. This means that both bearing rings can have a tight fit. The bearings are supplied without seals. They can be lubricated with grease or oil from the side. Suitable for high speeds.
NU version are floating bearings and accept only radial forces. The outer ring has two flanges, the inner ring has none. Outer and inner rings can be displaced by the value S in both directions.
NJ versions are support bearings and accept axial loads in one direction in addition to radial loads. The outer ring has two flanges, the inner ring has one flange. Outer and inner rings can be displaced in one direction by the value S.
Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. This radial clearance corresponds to the clearance CN acc. to DIN 620-4. These tolerance classes are standard and are well suited for most applications.
NU version are floating bearings and accept only radial forces. The outer ring has two flanges, the inner ring has none. Outer and inner rings can be displaced by the value S in both directions.
NJ versions are support bearings and accept axial loads in one direction in addition to radial loads. The outer ring has two flanges, the inner ring has one flange. Outer and inner rings can be displaced in one direction by the value S.
Dimensional and running tolerances correspond to tolerance class PN acc. to DIN 620. This radial clearance corresponds to the clearance CN acc. to DIN 620-4. These tolerance classes are standard and are well suited for most applications.
Temperature range
-30 °C to +120 °C.
On request
Other dimensions and versions.
Notă importantă privind descărcarea modelelor CAD
Pentru a descărca modelele noastre CAD, trebuie mai întâi să vă autentificați. Dacă nu v-ați creat încă un cont, vă rugăm să vă înregistrați la rubrica "Contul meu" (partea dreaptă a ecranului) și să urmați instrucțiunile.
Descoperiți gama de produse norelem
